Hiblow
Step 1
REMOVAL OF ELECTROMAGNET
Cut the wire from the terminals on electromagnets with nippers.
It is...
Step 1
REMOVAL OF THE CHAMBER BLOCKS
Remove the upper housing.
Remove the sound absorber.
Step 2
Undo...
Step 1
REMOVAL OF ELECTROMAGNET
Cut the wire from terminals on the electromagnets with nippers.
It is...
Step 1
REMOVAL OF THE CHAMBER BLOCKS
Remove the Upper Housing.
Step 2
Remove the sound absorber.
Pull...
Structure and Part Names
Step 1
REMOVING THE ELECTROMAGNET
Cut the wire from the terminals on the electromagnet with nippers.
•...
Step 1
REMOVAL OF THE CHAMBER BLOCKS
Remove the upper housing. (See page18)
Remove the sound absorber.
Remove...
Structure and Part Names
Step 1
Remove the upper housing according to the picture on page 17.
Remove the L-tube from the casing...
Structure and Part Names
Step 1
Remove all the bolts from the four corners.
Step 2
If it is difficult to remove it due to the...
Step 1
To remove the filter cover, put your fingers on one side of the cover and pull it up.
Step 2
Remove...
